This site has limited support for your browser. We recommend switching to Edge, Chrome, Safari, or Firefox.

Power factor between 7.62x39 and 7.62x54R

The power factor of a cartridge is calculated by multiplying its bullet weight (in grains) by its velocity (in feet per second) and then dividing the result by a constant factor, typically 1,000. The power factor is often used in shooting sports, such as IPSC (International Practical Shooting Confederation), to determine the minimum power level required for ammunition used in competitions.

Here are the approximate power factors for the 7.62x39mm and 7.62x54mmR cartridges:

1. 7.62x39mm: The bullet weights commonly used in the 7.62x39mm cartridge range from 122 to 154 grains (7.9 to 10 grams). Typical muzzle velocities for these bullets are around 2,300 to 2,600 feet per second (700 to 790 meters per second). Therefore, the power factor for 7.62x39mm ammunition would be approximately 280 to 400.

2. 7.62x54mmR: The bullet weights used in the 7.62x54mmR cartridge can vary from around 147 to 203 grains (9.5 to 13 grams). Muzzle velocities for these bullets typically range from 2,600 to 3,000 feet per second (790 to 910 meters per second). Consequently, the power factor for 7.62x54mmR ammunition would be approximately 380 to 610.

Please note that the power factor can vary depending on the specific load and bullet weight used within each cartridge. The values provided here are general estimates to give you an idea of the power factors commonly associated with these cartridges.

Welcome to our community! You get 2% cash back on all purchases, access to lightning deals and tons more!

Cart

Congratulations! Your order qualifies for free shipping You are $200 away from free shipping.
No more products available for purchase